H3C WX6103, Руководство по установке

Страница: 79 / 90

71
Enter your choice(0-5):
NOTE:
After downloading files with a changed baud rate, timely change the baud rate back to 9,600 bps in
HyperTerminal to ensure the normal display on the console screen when the system boots or reboots.
Upgrading the BootWare through the management Ethernet
interface
Follow these steps to upgrade the BootWare through the management Ethernet interface:
Step1
Enter the BootWare main menu (see “ BootWare menus .”) and select 7 to enter the BootWare operation
submenu. For more information about this menu, see “ BootWare operation submenu .”
Step2
Select 4 in the BootWare operation submenu to enter the BootWare operation Ethernet interface
submenu:
=====================<BOOTWARE OPERATION ETHERNET SUB-MENU>=====================
|<1> Update Full BootWare |
|<2> Update Extend BootWare |
|<3> Update Basic BootWare |
|<4> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
================================================================================
Enter your choice(0-4):
Step3
Select 4 in the BootWare operation Ethernet interface submenu. The system prompts you to modify the
network parameters.
============================<ETHERNET PARAMETER SET>============================
|Note: '.' = Clear field. |
| '-' = Go to previous field. |
| Ctrl+D = Quit. |
================================================================================
Protocol (FTP or TFTP) :tftp
Load File Name :wx6103.bin
Target File Name :wx6103.bin
Server IP Address :192.168.0.179
Local IP Address :192.168.0.125
Gateway IP Address :192.168.0.1
NOTE:
•
The load file name and target file name must not exceed 50 bytes.
•
When configuring a parameter, you can enter a new value directly, or press Enter to accept the default
value that follows a colon. Type . to clear the current input, - to return to the previous parameter field, and
Ctrl+D to quit from the pareter configuration interface.
•
The WX6103 access controller supports only the 10/100/1000Base-TX out-ofd management
Ethernet interface for application upgrade.
After modification of the parmeters, the system display returns to the BootWre operon Ethernet
interface submenu.