H3C WX3500H series Скачать руководство пользователя

Страница: 9 / 57

Configuring ACLs

Overview

An access control list (ACL) is a set of rules for identifying traffic based on criteria such as source IP

address, destination IP address, and por t number. The rules are also called permit or deny

statements.
ACLs are primarily used for packet filtering. "

Configuring packet filtering with ACLs

" provides an

example. You can use ACLs in QoS, security, routing, and other modules for identifying traffic. The

packet drop or forwarding decisions depend on the modules that use ACLs.

ACL types

Type

ACL number

IP version

Match criteria

WLAN client ACL

100 to 199

IPv4 and IPv6

SSID.

WLAN AP ACL

200 to 299

IPv4 and IPv6

AP MAC address and AP serial ID.

Basic ACLs

2000 to 2999

IPv4

Source IPv4 address.

IPv6

Source IPv6 address.

Advanced ACLs

3000 to 3999

IPv4

Source IPv4 address, destination IPv4

address, packet priority, protocol number, and

other Layer 3 and Layer 4 header fields.

IPv6

Source IPv6 address, destination IPv6

address, packet priority, protocol number, and

other Layer 3 and Layer 4 header fields.

Layer 2 ACLs

4000 to 4999

IPv4 and IPv6

Layer 2 header fields, such as source and

destination MAC addresses, 802.1p priority,

and link layer protocol type.

Numbering and naming ACLs

When creating an ACL, you must assign it a number or name for identification. You can specify an

existing ACL by its number or name. Each ACL type has a unique range of ACL numbers.
For an IPv4 basic or advanced ACL, its ACL number or name must be unique in IPv4. For an IPv6

basic or advanced ACL, its ACL number and name must be unique in IPv6. For a Layer 2, WLAN

client, or WLAN AP ACL, its number or name must be globally unique.

Match order

The rules in an ACL are sorted in a specific order. When a packet matches a rule, the device stops

the match process and performs the action defined in the rule. If an ACL contains overlapping or

conflicting rules, the matching result and action to take depend on the rule order.
The following ACL match orders are available:

•

config

—Sorts ACL rules in ascending order of rule ID. A rule with a lower ID is matched before

a rule with a higher ID. If you use this method, check the rules and their order carefully.

Содержание WX3500H series


























































Результаты поиска

Содержание WX3500H series

Отзывы:

Похожие инструкции для WX3500H series

Бренды по названию

Популярные бренды

H3C WX3500H series, Руководство по настройке пользователя

Результаты поиска

Содержание WX3500H series

Отзывы:

Похожие инструкции для WX3500H series

Бренды по названию

Популярные бренды