58
PQ configuration example on WX5002
Table 10
describes the Ethernet interface configuration prerequisites on different WX
series access controllers.
Table 10
Ethernet interface configuration prerequisites
Hardware
Ethernet interface configuration prerequisites
Switches
installed
with
access
controller
modules
Access
controller
modules
LS8M1WCMA0
LSQM1WCMB0
LSBM1WCM2A0
LSRM1WCM2A1
No special requirements. You can directly
configure Ethernet interfaces on the switch.
To configure wireless features during the
configuration process, log in to the access
controller module with the
oap connect slot
slot-number command.
LSWM1WCM10
LSWM1WCM20
No special requirements. You can directly
configure Ethernet interfaces on the switch.
To configure wireless features during the
configuration process, log in to the access
controller module with the
mcms connect
[
slot
slot-number ]
system
system-name command.
Unified
switches
WX3024
WX3010
WX3008
Use the
oap connect slot 0
command on the
access controller engine to log in to the
switching engine.
Access
controllers
WX6103
Use the
oap connect slot 0
command on the
active main control board to log in to the switch
interface board.
WX5002
WX5002V2
WX5004
No special requirements. You can directly
configure a GE interface on the access
controller.
Network requirements
As shown in
Figure 14
, Client A and Client B get data from Server through the AC.
Configure the AC to preferentially process data from the higher-priority client.
Содержание WX Series
Страница 6: ...6 Command conventions 65 Document conventions 65 Symbols 66 Index 67...
Страница 69: ...69 WLAN ESS interface 40...