H3C WSG1840X, Руководство по установке

Страница: 34 / 47

5
Restrictions and guidelines
•
Before you reboot the device, perform the following tasks:

Use the
save
command to save the running configuration. For more information about the
save
command, see configuration file management commands in H3C WSG1840X
Wireless Integrated Services Gateway Fundamentals Command Reference .

Use the
display startup
and
display boot-loader
commands to verify that you
have specified the correct next-startup configuration files and startup software images. If the
main startup software image is corrupt or does not exist, a reboot failure will occur. To avoid
a reboot failure, use the
boot-loader file
command to specify a new startup software
image. For more information about the
display startup
and
display boot-loader
commands, see software upgrade commands in H3C WSG1840X Wireless Integrated
Services Gateway Fundamentals Command Reference .
•
The device will not reboot if a file is being accessed.
Configuration procedure
Rebooting the device immediately
Task Command Remarks
Reboot the device immediately.
reboot
[
force
] Available in user view.
Scheduling a reboot for the device
Task Command Remarks
Schedule a reboot.
•
Schedule a reboot to occur at a
specific time or date:
schedule reboot at time
[
date
]
•
Schedule a reboot to occur after a
delay:
schedule reboot delay
time
Use either command.
By default, no reboot date or time or reboot
delay time is specified.
Available in user view.
The most recent configuration takes effect if
you execute the
scheduler reboot
a
t or
scheduler reboot delay
command multiple times.