H3C WA6520, Руководство по установке

Страница: 16 / 30

2-8
Figure2-14 Cross sectional area of the AP power port and electrode connection method
Connecting a PoE power source
To power the AP through PoE, use an Ethernet cable to connect an Ethernet port on a PoE switch to
the GE/PoE port on the AP. Attach the cable cover to the AP securely after connecting all cables.
Figure2-15 Connecting the AP to a PoE power source
Check after power-on
Examine the LEDs on the AP after you power on it to verify that the AP is operating correctly. For
more information about the LEDs, see "Appendix B LEDs and ports".
Connecting Ethernet fiber ports
To connect the AP to the network by using fibers, install a transceiver module on the AP, and then
insert the fiber connector to the transceiver module.
The fiber port on the AP supports only LC connectors. Purchase a transceiver module yourself. For
more information about transceiver modules, see "Appendix C Optional transceiver modules."
To connect an Ethernet fiber port on the AP:
1. Make sure the transceiver module bail latch engages the knob on the top of the transceiver
module. Hold the module by its two sides and push the module gently into the port.
2. Remove the dust cap from the LC connector.