6
Figure 12 Attaching the mounting bracket to the ceiling
4.
Connect an Ethernet cable to the GE/PoE port on the AP. Then position the four keyhole slots
in the AP rear on the pegs of the mounting bracket and slide the AP until it sits securely on the
pegs.
Figure 13 Attaching the AP to the mounting bracket
5.
Verify that the AP is installed securely to prevent it from falling off.
Connecting the AP to a power source
You can supply power to the AP by using a local power source or through 802.3af-compliant PoE as
required. Before powering the AP, make sure the local power source or the 802.3af-compliant
power sourcing equipment (PSE) is grounded reliably.
Connecting a local power source
Connecting a local power source by using a power adapter
You can use an AC/DC power adapter to connect the AP to a local power source. No power adapter
is provided with the AP. Order as required.
