8
To install the AP on a ceiling:
1.
Align the screw hole in the AP bracket with the screw hole in the AP rear. Use the M4 × 10
screw to secure the AP bracket to the AP.
Figure 10 Attaching the AP bracket to the AP rear
2.
Mark the installation holes on the ceiling by using the mounting bracket.
3.
Drill holes with a diameter of 5 mm (0.197 in) in the marked positions, as shown in
Figure 11 Drilling holes in the ceiling
4.
Insert the M4 × 30 pan head screws through the mounting holes in the mounting bracket and
the holes in the ceiling. Fasten washers and nuts at the other side of the ceiling to attach the
mounting bracket to the ceiling, as shown in
.
