H3C WA5320X, Руководство по установке

Страница: 31 / 36

2-21
Powering on the AP
IMPORTANT:
Make sure all cables are correctly connected and the AP is connected to the power source correctly
before powering on the AP.
Switch on the external power source and verify that the AP is operating correctly by examining the
LED on the AP. For more information about the LED, see "
Appendix B LEDs and Ports ."
Connecting the AP to the network
Verifying network connectivity when the AP operates as a fit
AP
All AP settings are configured on the AC. To verify the network connectivity of the AP, execute the
display wlan ap all
command on the AC. If the AP status is R/M , the AP has been connected
to the network.
<AC> display wlan ap all
Total number of APs: 1
Total number of connected APs: 1
Total number of connected manual APs: 1
Total number of connected auto APs: 0
Total number of connected common APs: 1
Total number of connected WTUs: 0
Total number of inside APs: 0
Maximum supported APs: 3072
Remaining APs: 3071
Total AP licenses: 128
Remaining AP licenses: 127
AP information
State : I = Idle, J = Join, JA = JoinAck, IL = ImageLoad
C = Config, DC = DataCheck, R = Run M = Master, B = Backup
AP name APID State Model Serial ID
ap1 1 R/M WA5320X 219801A17C8171E00012
Verifying network connectivity when the AP operates as a
cloud-managed AP
When the AP operates in fat AP mode, use the
ping
command to ping an uplink device. If the ping
operation is successful, the AP has been connected to the network.