manualshive.com logo in svg

H3C WA2620X-AGNP, Инструкция по настройке через веб-интерфейс, Страница: 86 / 447

Поделиться
Скачать
H3C WA2620X-AGNP Скачать руководство пользователя страница 86

 

73 

Figure 63

 

Create an SNMP view (1) 

 

 

4.

 

Enter the view name. 

5.

 

Click 

Apply

. 

The page in 

Figure 64

 appears. 

Figure 64

 

Create an SNMP view (2) 

 

 

6.

 

Configure the parameters as described in 

Table 38

. 

7.

 

Click 

Add

. 

8.

 

Repeat steps 6 and 7 to add more rules for the SNMP view. 

9.

 

Click 

Apply

. 

To cancel the view, click 

Cancel

. 

Table 38

 

Configuration items 

Item Description 

View Name 

Set the SNMP view name. 

Rule 

Select to exclude or include the objects in the view range determined by the MIB 
subtree OID and subtree mask. 

MIB Subtree OID 

Set the MIB subtree OID (such as 1.4.5.3.1) or name (such as system). 
MIB subtree OID identifies the position of a node in the MIB tree, and it can uniquely 
identify a MIB subtree.

 

Subtree Mask 

Set the subtree mask. 
If no subtree mask is specified, the default subtree mask (all Fs) will be used for 
mask-OID matching.

 

 

Содержание WA2620X-AGNP
































































































































































































































































































































































































































































Отзывы:

Нет отзывов