H3C WA2620X-AGNP Скачать руководство пользователя страница 80

Страница: 80 / 447

Item Description

Access Level

Set the access level for a user. Users of different levels can perform different operations.
Web user levels, from low to high, are

visitor

monitor

configure

, and

management

•

Visitor: Users of visitor level can perform the ping and traceroute operations, but they

can neither access the device data nor configure the device.

•

Monitor: Users of this level can only access the device data but cannot configure the

device.

•

Configure: Users of this level can access data on the device and configure the device,

but they cannot upgrade the host software, add/delete/modify users, or back

up/restore the application file.

•

Management: Users of this level can perform any operations on the device.

Password

Set the password for a user.

Confirm Password

Enter the same password again. Otherwise, the system prompts that the two passwords
enter are not consistent when you apply the configuration.

Service Type

Set the service type, including web, FTP, Telnet, and terminal services. You must select
one of them.

Setting the super password

Users of the management level can specify the password for a lower-level user to switch from the current

access level to the management level. If no such a password is configured, the switchover fails.
To set the super password:

Select

Device

Users

from the navigation tree.

Click the

Super Password

tab

The super password configuration page appears.

Figure 59

Super password

Set the super password as described in

Table 34

Click

Apply

Содержание WA2620X-AGNP
































































































































































































































































































































































































































































Результаты поиска

Содержание WA2620X-AGNP

Отзывы:

H3C WA2620X-AGNP, Инструкция по настройке через веб-интерфейс, Страница: 80 / 447

Результаты поиска

Содержание WA2620X-AGNP

Отзывы: