H3C UniServer R6900 G5, Руководство пользователя

Страница: 55 / 83

51
4. Remove the riser card on which the SATA M.2 SSD expander module resides:
a. Disconnect the cable from the SATA M.2 SSD expander module.
b. Remove the riser card. For more information, see " Removing the riser card cage ."
5. Remove the SATA M.2 SSD expander module from the riser card. For more information, see
"
Removing a SATA M.2 SSD expander module ."
6. Remove SATA M.2 SSDs from the expander module. Remove the screw that secures an SSD
on the expander module and then pull the SSD out.
Installing a SATA M.2 SSD
1. Install the SATA M.2 SSD to the SATA M.2 SSD expander module. Insert the connector of the
SSD into the socket and then use the screw to secure the SSD into place.
2. Install the expander module on a riser card. For more information, see " Installing a SATA M.2
SSD expander module ."
3. Install the riser card on the server. For more information, see " Installing a riser card and a PCIe
module ."
4. Install the access panel. For more information, see " Installing the access panel ."
5. Rack-mount the server. For more information, see " Rack-mounting the server ."
6. Connect the power cord. For more information, see " Connecting the power cord ."
7. Power on the server. For more information, see " Powering on the server ."
Replacing a SATA M.2 SSD expander module
WARNING!
To avoid bodily injury from hot surfaces, allow the server and its internal modules to cool before
touching them.
Prerequisites
Take the following ESD prevention measures:
•
Wear antistatic clothing.
•
Wear an ESD wrist strap and make sure it makes good skin contact and is reliably grounded.
•
Do not wear any conductive objects, such as jewelry or watches.
When you replace a component, examine the slot and connector for damages. Make sure the pins
are not damaged (bent for example) and do not contain any foreign objects.
Removing a SATA M.2 SSD expander module
1. Power off the server. For more information, see " Powering off the server ."
2. Remove the server from the rack. For more information, see " Removing the server from a rack ."
3. Remove the access panel. For more information, see " Removing the access panel ."
4. Remove the riser card on which the SATA M.2 SSD expander module resides:
a. Disconnect the cable from the SATA M.2 SSD expander module.
b. Remove the riser card. For more information, see " Removing a riser card and a PCIe
module ."