58
Figure 71 Installing the GPU module support bracket
8.
Install the GPU module and connect the GPU module power cord, as shown in
:
a.
Connect the GPU power end of power cord to the GPU module, as shown by callout 1.
b.
Insert the GPU module into PCIe slot 2 along the guide rails, as shown by callout 2.
c.
Connect the other end of the power cord to the riser card and use the screw to secure the
GPU module into place, as shown by callouts 3 and 4.
Figure 72 Installing a GPU module
9.
Install the riser card on PCIe riser connector 1, and then fasten the captive screw to the chassis
air baffle, as shown in
.
10.
Connect cables for the GPU module as needed.
11.
Install the access panel. For more information, see "
12.
Rack-mount the server. For more information, see "
13.
Connect the power cord. For more information, see "
14.
Power on the server. For more information, see "
