H3C UniServer R4900 G3, Руководство пользователя

Страница: 59 / 299

50
7.
Connect one end of the supercapacitor extension cable to the flash card.
CAUTION:
Make sure the extension cable is the correct one. For more information, see Table 7 .
{
If the storage controller is installed with an external flash card, connect the supercapacitor
extension cable to the flash card.
Figure 60 Connecting the supercapacitor extension cable to the flash card
{
If the storage controller uses a built-in flash card, connect the supercapacitor extension
cable to the supercapacitor connector on the storage controller.
8.
Install the standard storage controller to the server by using a riser card. For more information,
see "
Installing riser cards and PCIe modules ."
9.
(Optional.) Install the supercapacitor. For more information, see " Installing a supercapacitor ."
10.
(Optional.) Connect the other end of the supercapacitor extension cable to the supercapacitor.
For more information about the connection, see "
Connecting the flash card and the
supercapacitor of the power fail safeguard module ."
11.
Connect the drive data cables to the standard storage controller. For more information, see
"
8SFF server ."
12.
Install the removed fan cage. For more information, see " Installing fans ."
13.
Install the removed air baffles. For more information, see " Installing air baffles ."
14.
Install the access panel. For more information, see " Replacing the access panel ."
15.
Rack-mount the server. For more information, see " Rack-mounting the server ."
16.
Connect the power cord. For more information, see " Connecting the power cord ."
17.
Power on the server. For more information, see " Powering on the server ."
Verifying the installation
Log in to HDM to verify that the standard storage controller, flash card, and supercapacitor are
operating correctly. For more information, see HDM online help.
Installing a supercapacitor
Guidelines
You can install a supercapacitor in the server chassis, on the air baffle, or in a supercapacitor
container. The priorities of these installation locations are in descending order. If the location with a
high priority is unavailable, use the next available location.
Table 8 shows the supercapacitors that
can be deployed at each location.