3
Figure 3 Removing the air baffle
Installing the processor
CAUTION:
•
To prevent damage to the pins on the processor socket, always install a cover over an empty
processor socket.
•
Make sure all processors on a server are the same part number.
To install the processor:
1.
Install the processor onto the retaining bracket.
CAUTION:
To avoid damage to a processor, always hold the processor by the edges. Never touch the
gold contacts on the processor bottom.
a.
As shown by callout 1 in
line up the small triangle on the processor with the
alignment triangle molded into the retaining bracket, and align the guide pin on the bracket
with the notch on the processor.
b.
As shown by callout 2 in
,
lower the processor gently and make sure the guide pins
on the opposite side of the bracket fit snugly into notches on the processor.
