H3C UniServer R2700 G3, Руководство пользователя

Страница: 94 / 226

7-11
Figure 7-14 Removing the riser card on PCIe riser connector 1
6.
Open the retaining latch on the riser card, and then pull the PCIe module out of the slot, as
shown in
Figure 7-15 .
Figure 7-15 Removing a PCIe module
7.
Install a new riser card and PCIe module. For more information, see " Installing riser cards and
PCIe modules ."
8.
Reconnect the removed cables.
9.
Install the access panel. For more information, see " Installing the access panel ."
10.
Rack-mount the server. For more information, see " Rack-mounting the server ."
11.
Connect the power cord. For more information, see " Connecting the power cord ."
12.
Power on the server. For more information, see " Powering on the server ."