52
Figure 67 Removing the riser card blank
5.
Install the PCIe module on the riser card:
a.
Remove the screw on the PCIe module blank in the target PCIe slot, and then pull the blank
out of the slot, as shown in
Figure 68 Removing the PCIe module blank
b.
Insert the PCIe module into the slot along the guide rails and use the screw to secure it into
place, as shown in
.
Figure 69 Installing the PCIe module
6.
Insert the riser card in PCIe riser connector 2, and then fasten the captive screw to the chassis
air baffle, as shown in
.
