83
Configuring load sharing criteria for link
aggregation groups
You can determine how traffic is load-shared in a link aggregation group by configuring load sharing
criteria. The criteria can be MPLS labels, service port numbers, IP addresses, MAC addresses, or
receiving ports carried in packets, or any combination.
To configure the global link-aggregation load sharing criteria:
Step
Command
1.
Enter system view.
system-view
2.
Configure the global link-aggregation load
sharing criteria.
link-aggregation load-sharing mode
{
destination-ip
|
destination-mac
|
destination-port
|
ingress-port
|
mpls-label1
|
mpls-label2
|
mpls-label3
|
source-ip
|
source-mac
|
source-port
} *
NOTE:
Only SPC cards support the configuration of link-aggregation load sharing criteria. Even though you can
configure the
link-aggregation load-sharing mode
command on SPE cards, the command does not take
effect.
Displaying and maintaining Ethernet link
aggregation
Task
Command
Remarks
Display information for an
aggregate interface or multiple
aggregate interfaces.
display interface
[
bridge-aggregation
|
route-aggregation
] [
brief
[
down
] ] [
|
{
begin
|
exclude
|
include
}
regular-expression
]
display interface
{
bridge-aggregation
|
route-aggregation
}
interface-number
[
brief
] [
|
{
begin
|
exclude
|
include
}
regular-expression
]
Available in any view
Display the local system ID.
display lacp system-id
[
|
{
begin
|
exclude
|
include
}
regular-expression
]
Available in any view
Display the global
link-aggregation load sharing
criteria.
display link-aggregation load-sharing mode
[
interface
[ {
bridge-aggregation
|
route-aggregation
}
interface-number
] ] [
|
{
begin
|
exclude
|
include
}
regular-expression
]
Available in any view
Display detailed link aggregation
information for link aggregation
member ports.
display link-aggregation member-port
[
interface-list
] [
|
{
begin
|
exclude
|
include
}
regular-expression
]
Available in any view
Display summary information
about all aggregation groups.
display link-aggregation summary
[
|
{
begin
|
exclude
|
include
}
regular-expression
]
Available in any view