3-2
LED
Status
Description
Mbps.
Off
No link is present on the port.
Power button/LED
Flashing red (8 Hz)
A power cord is connected to the device or the
power button is pressed to start up the Comware
system.
Flashing red (1 Hz)
The BIOS is starting up.
Flashing green (1 Hz)
The BIOS has started and BootWare is starting up.
Steady green
The Comware system is starting up or is operating
correctly.
Flashing green (8 Hz)
The power button is pressed to power off the virtual
machine and Comware system.
Steady red
The Comware system is shutting down.
Off
The Comware system has been shut down.
Running status LED
(RUN)
Flashing green (8 Hz)
The device is in BootWare stage.
Steady green
The device is in Kernel stage, including Eshell
stage.
Flashing green (1 Hz)
The Comware system is starting up or is operating
correctly.
Flashing yellow (1 Hz)
The SDRAM has failed the self-test.
Flashing yellow (8 Hz)
The extended BootWare segment does not exist.
Steady yellow
The boot.bin file does not exist.
Off
No power input, or exceptions have occurred.
System alarm LED
(ALM)
Steady red
An alarm has occurred on the system because of
excessive power, overtemperature, riser module
fan tray failure, or abnormal voltage.
Off
No alarm has occurred on the system.
IRF LED (reserved)
Flashing green (1 Hz)
The device is the global active device in IRF mode.
Steady green
The device is the standby device in IRF mode.
Yellow
The device is in IRF mode but the establishment of
an IRF fabric has failed.
Off
The device is in standalone mode.
Storage controller status
LED (RAID)
Steady green
The storage controller is present.
Off
No storage controller is present.
Management Ethernet
copper port LED (MGMT)
Steady green
A 1000 Mbps link is present on the port.
Flashing green (3 Hz)
The port is sending or receiving data at 1000 Mbps.
Steady yellow
A 100 Mbps link is present on the port.
Flashing yellow (3 Hz)
The port is sending or receiving data at 100 Mbps.
Off
No link is present on the port.
