4
Q.
What is intelligent power management?
A.
Intelligent power management powers on or off cards based on the remaining power and the power
consumptions of the operating cards and shuts down non-operating cards.
Q.
What cards and interface modules are available for the router?
A.
See
H3C SR6600/SR6600-X Routers Interface Module Guide
.
Q.
What transceiver modules available for the router?
A.
See
H3C SR6600/SR6600-X Routers Interface Module Guide.
Q.
Do the router LPUs support interface type changing between POS and GE?
A.
Only the HIM-TS8P interface module supports interface type changing between POS and GE.
Q.
Does the router support switching fabric modules?
A.
The SR6600-X routers support the SFE-X1 switching fabric module. The SR6600 routers support
the SFE-L1 switching fabric module.
Software
This section contains the most frequently asked questions about the router software.
Q.
Does the BootWare support forward compatibility?
A.
Yes. The BootWare is released together with the Comware software. You do not need to upgrade
the BootWare separately. For an SR6602-X1 or SR6602-X2 router or an RSE-X2 MPU to migrate
from Comware 5 to Comware 7, you must follow the BootWare upgrade steps listed in the release
notes to upgrade the BootWare first.
Q.
How do I view the system version information and operation time information?
A.
Use the
display version
command. This command displays information about the current
BootWare version, Comware system software version, and system operation time.
Q.
Can I delete the Comware system software image file after the upgrade is completed?
A.
No. The file contains the software images for MPUs and the software images for LPUs. MPUs and
LPUs read these images during startup.
Q.
Can I view deleted files?
A.
Yes if the files were deleted by a
delete
command without the
/unreserved
option. A
delete
command with the
/unreserved
option permanently deletes files. A
delete
command without
the
/unreserved
option moves commands to the recycle bin.
To view the commands in the recycle bin, use the
dir /all
command. The name of a file in the
recycle bin is placed in brackets ([ ]).
You can use the
undelete
command to restore commands from the recycle bin.
