7
|<8> Skip Authentication for Console Login |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================
Ctrl+Z: Access EXTEND-ASSISTANT MENU
Ctrl+F: Format File System
Enter your choice(0-9):
3.
Enter
9
to access the storage media management menu. Follow the displayed instructions to
specify the operating storage medium and then return to the extended BootWare menu.
4.
Press
Ctrl+F
to format the Flash.
Q.
Does the router relearn MAC address, ARP, and route entries after an active/standby switchover?
A.
The router relearns route entries, but it does not relearn MAC address entries and ARP entries.
The switchover does not interrupt MAC-based forwarding or ARP services because the MAC
address table and the ARP table are backed up on the standby MPU. The impact on routing-based
forwarding services depends on the configuration of GR and NSR:
•
If GR or NSR is configured, the switchover will not interrupt forwarding services.
•
If GR and NSR are not configured, the switchover will interrupt forwarding services.
Q.
Why should I wait for all LPUs to operate correctly before I save the running configuration?
A.
The configuration is saved on the Flash or CF card. During startup, the router configures LPUs by
loading the configuration to memory. If you execute the
save
command before the process is
completed, the incomplete configuration in memory will be saved to the Flash to replace the
complete configuration, resulting in configuration loss.
Q.
Can the router operate as a TFTP server?
A.
No.
IRF
This section contains the most frequently asked questions about IRF.
Q.
Are all H3C SR6600 routers IRF capable?
A.
Yes, all H3C SR6600 routers are IRF capable.
Q.
Do all SR6600 service modules support IRF?
A.
Yes.
Q.
Can an H3C SR6600 router form an IRF fabric with any devices in the same series?
A.
No. When you set up an IRF fabric, follow these hardware restrictions and guidelines:
•
The H3C SR6604, SR6608, and SR6616 routers can form an IRF fabric with each other. The
routers cannot form an IRF fabric with any other devices.
•
The H3C SR6604-X, SR6608-X, and SR6616-X routers can form an IRF fabric with each other.
The routers cannot form an IRF fabric with any other devices.
•
The H3C SR6602-X1 and SR6602-X2 routers can form an IRF fabric with each other. The
routers cannot form an IRF fabric with any other devices.
