H3C SOHO IE4300, Справочник по командам

Страница: 736 / 3296

11
Examples
# Apply DHCP policy test to VLAN-interface 10.
<Sysname> system-view
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] dhcp apply-policy test
Related commands
dhcp policy
dhcp class
Use
dhcp class
to create a DHCP user class and enter its view, or enter the view of an existing
DHCP user class.
Use
undo dhcp class
to delete the specified DHCP user class.
Syntax
dhcp class class-name
undo dhcp class class-name
Default
No DHCP user classes exist.
Views
System view
Predefined user roles
network-admin
Parameters
class-name
: Specifies the name of a DHCP user class, a case-insensitive string of 1 to 63
characters.
Usage guidelines
In the DHCP user class view, you can use the
if-match
command to configure match rules to
group clients to the user class.
Examples
# Create DHCP user class test and enter DHCP user class view.
<Sysname> system-view
[Sysname] dhcp class test
[Sysname-dhcp-class-test]
Related commands
address range
class ip-pool
class option-group
class range
dhcp policy
if-match