Command Manual – User Access
H3C SecPath Series Security Products
Chapter 3 PPPoE Client Configuration Commands
3-7
1 164 6126 0 83 1069 0
2 304 9886 0 156 2142 0
For more details of the display information, see the following table.
Table 3-2
Explanation of the information displayed by pppoe-client session packet
Field
Explanation
ID
Session ID, PPPoE session ID
InP
In Packets: number of received packets
InO
In Octets: number of received octets
InD
In Discards: number of received illegal and discarded packets
OutP
Out Packets: number of sent packets
OutO
Out Octets: number of sent octets
3.1.8 interface dialer
Syntax
interface dialer number
undo interface dialer number
View
Any view
Parameter
number
:
Interface number in the range of 0 to 1,023.
Description
Use the
interface dialer
command to create a dialer circular group for the Circular
DCC, or configure a dialer interface for the Resource-Shared DCC.
Use the
undo interface dialer
command to cancel the existing setting.
By default, no dialer interface is defined.
In Circular DCC, dialer circular group function can apply the configuration of a dialer
interface to a group of physical interface, so that they can inherit the attributes of the
dialer interface. This method is very useful in calling multiple destination addresses:
configure multiple
dialer route
commands on the dialer interface and just the
dialer
circular-group
command on each physical interface.
In Resource-Shared DCC, any dialer interface can use the services provided by
multiple physical interfaces, and individual physical interfaces can provide services for
multiple dialer interfaces at the same time. Therefore, authentication must be
