Command Manual – User Access
H3C SecPath Series Security Products
Chapter 1 PPP Configuration Commands
1-13
undo timer hold
View
Interface view
Parameter
seconds:
Time interval for the interface to send keepalive packet in seconds. The value
ranges from 0 to 32767 and defaults to 10.
Description
Use the
timer hold
command to set the time cycle for sending keepalive packet.
Use the
undo timer hold
command to restore the default time cycle.
Related command:
display interface
.
Example
# Set the time cycle for sending keepalive packets from the interface Ethernet0/0/0 to
20 seconds.
[H3C-Ethernet0/0/0] timer hold 20
1.2 PPP Link Efficiency Mechanism Commands
1.2.1 debugging ppp compression iphc rtp
Syntax
debugging ppp compression iphc rtp
{
all
|
context_state
|
error
|
full_header
|
general_info
}
undo debugging ppp compression iphc rtp
{
all
|
context_state
|
error
|
full_header
|
general_info
}
View
User view
Parameter
all
: Enables all IPHC RTP debugging.
context_state
: Enables IPHC RTP context_state packet debugging.
error
: Enables IPHC RTP error debugging.
full_header
: Enables IPHC RTP full_header debugging.
general_info
: Enables general IPHC RTP debugging.
