63
Displaying running status data
For diagnosis or troubleshooting, you can use the
display diagnostic-information
command in any view
to bulk collect running data for multiple modules, rather than using separate
display
commands (such as
display clock
,
display version
,
display device
, and
display current-configuration
) to collect running
status data module by module.
•
Save running status data for multiple feature modules.
<Sysname> display diagnostic-information
Save or display diagnostic information (Y=save, N=display)? [Y/N]:y
Please input the file name(*.diag)[cfa0:/default.diag]:aa.diag
Diagnostic information is outputting to cfa0:/aa.diag.
Please wait...
Save successfully.
To view the content of file
aa.diag
, execute the
more aa.diag
command in user view, in
combination of the
Page Up
and
Page Down
keys.
•
Display running status data for multiple feature modules.
<Sysname> display diagnostic-information
Save or display diagnostic information (Y=save, N=display)? [Y/N]:n
=================================================
===============display clock===============
=================================================
08:54:16 UTC Fri 11/12/2010
===================================================
===============display version===============
===================================================
…
Displaying detailed information about cards
Use the
display device verbose
command to display detailed information about cards.
<Sysname> display device verbose
Status : OK
Type : RPU
MPUA PCB : B
SWBA PCB : A
MPUA Basic CPLD: 3.0
MPUA Extend CPLD: 1.0
SWBA CPLD: 1.0
MPUA LX30T FPGA: 7.01
Driver : 1.0
SubCard Num : 5
CFCard Num : 2
Usb Num : 2
Содержание SecPath F5000-A5
Страница 119: ...109 Figure 83 Fiber cabling example...