H3C SecPath F5000-A5, Руководство по установке

Страница: 58 / 121

48
Table 8 Configuration items
Item Description
IP Configuration
Select an IP address acquisition approach for the
interface:
•
None —Assigns no IP address to the interface.
•
Static Address —If you select this option, you must
manually assign an IP address and a mask to the
interface.
•
DHCP —Enables the interface to automatically
obtain an IP address through the DHCP protocol.
•
Do not change —Leaves the IP address of the
interface unchanged.
IMPORTANT:
Changing the IP address of
the interface you are using
disconnects you from the
firewall.
IP Address Configure an IP address and a mask for the interface.
These two fields are available only when the value of
the
IP Configuration field is Static Address .
Mask
Configuring NAT
1. Click Next on the interface IP address configuration page to enter the NAT configuration page.
Figure 42 Basic configuration wizard—5/6 (NAT configuration)
2. Complete NAT configuration as described in Table 9 .
Table 9 Configuration items
Item Description
Interface
Select the interface to which the NAT configuration will be applied, typically the
outbound interface of the firewall.