Manual Version
:6PW103-20121130
BOM:3123A13Q
ii
Figure 2 Front panel of the NSQ1MPUA0
(1) Captive screw
(2) Ejector lever
(3) Management Ethernet port-10/100/1000BASE-T (MANAGEMENT)
(4) Link status LED of the management Ethernet port (LINK)
(5) Data reception/transmission LED of the management Ethernet port (ACT)
(6) HA port-10/100/1000BASE-T (HA)
(7) Link status LED of the HA port (LINK)
(8) Data reception/transmission LED of the HA port (ACT)
(9) Console port (CONSOLE)
(10) AUX port (AUX)
(11) CF card eject button (CF CARD)
(12) USB interface 0 (0)
(13) USB interface 1 (1)
(14) USB interface 1 LED (USB1)
(15) CF card slot
(16) CF card LED (CF)
(17) Run LED (RUN)
(18) Active LED of the MPU (ACT)
(19) Alarm LED (ALM)
(20) Reset button (RESET)
Table 1 NSQ1MPUA0 specifications
Item Specification
Flash 4
MB
Memory type and size
DDR2 SDRAM
2 memory slots
4 GB (default); two 2 GB memory chips
Memory modules must be used in pairs with the same size.
NVRAM 256
KB
Console port
1
9600 bps (default) to 115200 bps
AUX port
1
9600 bps (default) to 115200 bps
Management Ethernet port
1 (10Base-T/100Base-TX/1000Base-T)
HA port
1 (10Base-T/100Base-TX/1000Base-T)
CF card
•
256 MB by default for the built-in CF card
•
256 MB, 512 MB, or 1 GB for an optional external CF card
USB interfaces
2 (USB 0: operating in the host mode; USB 1: operating in the device mode)
Reserved for future use
Dimensions (H × W × D)
45.2 × 399.2 × 434.6 mm (1.78 × 15.72 × 17.11 in)
