H3C S9825 Series, Руководство пользователя

Страница: 31 / 34

3-30
Figure3-2 Serial console cable
Table3-1 Console port signaling and pinout
RJ-45 Signal DB-9 Signal
1 RTS 8 CTS
2 DTR 6 DSR
3 TXD 2 RXD
4 SG 5 SG
5 SG 5 SG
6 RXD 3 TXD
7 DSR 4 DTR
8 CTS 7 RTS
To connect the serial console port on the switch to a terminal (for example, a PC):
1. Plug the DB-9 female connector of the serial console cable to the serial port on the PC.
2. Connect the RJ-45 connector to the serial console port on the switch.
Setting terminal parameters
To configure and manage the switch through the console port, you must run a terminal emulator
program, TeraTermPro or PuTTY, on your configuration terminal. You can use the emulator program
to connect a network device, a Telnet site, or an SSH site. For more information about the terminal
emulator programs, see the user guides for these programs
The following are the required terminal settings:
•
Bits per second —9600.
•
Data bits —8.
•
Stop bits —1.
•
Parity —None.
•
Flow control —None.
Powering on the switch
1. Before powering on the switch, verify that the following conditions are met:

All the fan tray slots have a fan tray installed.

The power cords are connected correctly.