184
e.
Select
Connection
>
SSH
>
Auth
from the navigation tree.
f.
Click
Browse…
to bring up the file selection window, navigate to the private key file
(
private.ppk
in this example) and click
OK
.
The window shown in
appears.
Figure 54
Specifying the private key file
g.
Click
Open
to connect to the server.
If the connection is successfully established, the system asks you to enter the username. After
entering the username (
client002
), you can enter the CLI of the server.
Password authentication enabled Stelnet client configuration
example
Network requirements
As shown in
, you can log in to Switch B through the Stelnet client that runs on Switch A and are
assigned the user role network-admin for configuration management. Switch B acts as the Stelnet server
and uses password authentication. The username and password of the client are saved on Switch B.
Figure 55
Network diagram