182
Generating Keys...
.++++++++++++++++++++++++++++++++++++++++++++++++++*
........+......+.....+......................................+
...+.................+..........+...+
Create the key pair successfully.
# Enable the SSH server function.
[Switch] ssh server enable
# Assign an IP address to VLAN-interface 2. The Stelnet client will use this address as the
destination for SSH connection.
[Switch] interface vlan-interface 2
[Switch-Vlan-interface2] ip address 192.168.1.40 255.255.255.0
[Switch-Vlan-interface2] quit
# Set the authentication mode for the user interfaces to AAA.
[Switch] user-interface vty 0 15
[Switch-ui-vty0-15] authentication-mode scheme
[Switch-ui-vty0-15] quit
# Import the client's public key from file
key.pub
and name it
switchkey
.
[Switch] public-key peer switchkey import sshkey key.pub
# Create an SSH user
client002
with the authentication method
publickey
, and assign the public
key
switchkey
to the user.
[Switch] ssh user client002 service-type stelnet authentication-type publickey assign
publickey switchkey
# Create a local device management user
client002
with the service type
ssh
and the user role
network-admin
.
[Switch] local-user client002 class manage
[Switch-luser-manage-client002] service-type ssh
[Switch-luser-manage-client002] authorization-attribute user-role network-admin
[Switch-luser-manage-client002] quit
3.
Specify the private key file and establish a connection to the Stelnet server:
a.
Launch PuTTY.exe on the Stelnet client to enter the interface shown in
b.
In the
Host Name
(or IP address)
field, enter the IP address
192.168.1.40
of the Stelnet server.