6-10
To do…
Use the command…
Remarks
Specify the NetBIOS node type
netbios-type
{
b-node
|
h-node
|
m-node
|
p-node
}
Required
Not specified by default.
If b-node is specified for the client, you do not need to specify any WINS server address.
Configuring the BIMS Server Information for the Client
A DHCP client performs regular software update and backup by using configuration files obtained from
a branch intelligent management system (BIMS) server. Therefore, the DHCP server needs to offer
DHCP clients the BIMS server IP address, port number, and shared key from the DHCP address pool.
Follow these steps to configure the BIMS server IP address, port number, and shared key in the
DHCP address pool:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter DHCP address pool view
dhcp server ip-pool
pool-name
[
extended
]
—
Specify the BIMS server IP
address, port number, and shared
key
bims-server ip
ip-address
[
port
port-number
]
sharekey
key
Required
Not specified by default.
Configuring Gateways for the Client
DHCP clients wishing to access hosts outside the local subnet request gateways to forward data. You
can specify gateways in each address pool for clients and the DHCP server will assign gateway
addresses while assigning an IP address to the client. Up to eight gateways can be specified in a
DHCP address pool.
Follow these steps to configure the gateways in the DHCP address pool:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter DHCP address pool view
dhcp server ip-pool
pool-name
[
extended
]
—
Specify gateways
gateway-list ip-address
&<1-8>
Required
No gateway is specified by default.