3
−
If they are configured incorrectly, reconfigure them.
−
If they are configured correctly, go to Step 2.
2.
Verify that the ACL is configured correctly.
Execute the
display acl
command to check whether the ACL is configured correctly.
{
If the ACL is configured incorrectly, reconfigure it.
{
If the ACL is configured correctly but the problem persists, contact H3C Support.
3.
If the problem persists, contact H3C Support.
ACL used in a packet filter
To resolve the problem when the ACL is used in a packet filter:
1.
Verify that the packet filter configuration is correct:
a.
Execute the
display packet-filter
command.
b.
If there are any configuration errors, reconfigure the packet filter.
2.
Verify that the ACL configuration is correct:
a.
Execute the
display acl
command.
b.
If there are any configuration errors, reconfigure the ACL.
3.
If the problem persists, contact H3C Support.
Related commands
This section lists the commands that you might use for troubleshooting ACLs.
Command Description
display acl resource
Displays information about hardware resources for ACL
applications.
display qos policy interface
Displays information about the QoS policies applied to an
interface or to all interfaces.
display qos vlan-policy
Displays information about QoS policies applied to VLANs.
display qos policy global
Displays information about global QoS policies.
display qos policy control-plane
Displays information about the QoS policies applied to the
specified control plane.
display traffic classifier user-defined
Displays traffic class configurations.
display traffic behavior user-defined
Displays traffic behavior configurations.
display packet-filter
Displays whether an ACL has been successfully applied to an
interface for packet filtering.