2-6
S5560X-54F-HI
Figure2-5 Front panel
(1) SFP port
(2) SFP port LED
(3) SFP+ port
(4) SFP+ port LED
(5) Management Ethernet port
(6) Console port (CONSOLE)
(7) Micro USB console port
(8) Mode LED (MODE)
(9) USB port
(10) Mode button
(11) System status LED (SYS)
(12) Expansion module 2 status LED (SLOT2)
(13) Expansion module 1 status LED (SLOT1)
(14) Power supply 2 status LED (PWR2)
(15) Power supply 1 status LED (PWR1)
(16) QSFP+ port LED
(17) QSFP+ port
(18) Management Ethernet port LED (ACT/LINK)
Figure2-6 Rear panel
(1) Grounding screw
(2) Fan tray 1 (FAN1)
(3) Expansion module 1 (SLOT1)
(4) Expansion module 2 (SLOT2)
(5) Fan tray 2 (FAN2)
(6) Power supply 1 (PWR1)
(7) Power supply 2 (PWR2)
The S5560X-54F-HI switch comes with power supply slot PWR1 empty and power supply slot PWR2
installed with a filler panel. You can install one or two power supplies for the switch as required. In
, two PSR250-12A1 power supplies are installed in the power supply slots.
The S5560X-54F-HI switch comes with the two fan tray slots empty. You must install two fan trays of
the same model for the switch. In
, two LSWM1FANSCBE fan trays are installed in the fan
tray slots.
The S5560X-54F-HI switch comes with a filler panel in each expansion slot. You can select
expansion modules for the switch as required. In
, two LSWM4SP8PM interface cards are
installed in the expansion slots.
1
14
13
12
10
9
8
2
5
6 7
15
16
17
18
11
3
4
1
2
3
4
5
6
7
