H3C S5500-HI Switch Series, Руководство по настройке Mpls

Страница: 56 / 400

44
Step Command Remarks
2. Create a RIPng process for an
IPv6 VPN instance and enter
RIPng view.
ripng [ process-id ] vpn-instance
vpn-instance-name
N/A
3. Redistribute the VPN routes.
import-route protocol [ process-id ]
[ allow-ibgp ] [ cost cost |
route-policy route-policy-name ] *
By default, no route of any other
routing protocol is redistributed
into RIPng.
4. Configure the default cost
value for the redistributed
routes.
default cost value
Optional.
0 by default.
5. Return to system view.
quit N/A
6. Enter interface view.
interface interface-type
interface-number
N/A
7. Enable the RIPng process on
the interface.
ripng process-id enable Disabled by default.
Configuring OSPFv3 between IPv6 MCE and PE
Step Command Remarks
1. Enter system view.
system-view N/A
2. Create an OSPFv3 process for
an IPv6 VPN instance and
enter OSPFv3 view.
ospfv3 [ process-id ] vpn-instance
vpn-instance-name
N/A
3. Set the router ID.
router-id router-id N/A
4. Redistribute the VPN routes.
import-route protocol [ process-id
| allow-ibgp ] [ cost value |
route-policy route-policy-name |
type type ] *
By default, no route of any other
routing protocol is redistributed
into OSPFv3.
5. Configure a filtering policy to
filter the redistributed routes.
filter-policy { acl6-number |
ipv6-prefix ipv6-prefix-name }
export [ bgp4+ | direct | isisv6
process-id | ospfv3 process-id |
ripng process-id | static ]
Optional.
By default, redistributed routes are
not filtered.
6. Return to system view.
quit N/A
7. Enter interface view.
interface interface-type
interface-number
N/A
8. Enable the OSPFv3 process
on the interface.
ospfv3 process-id area area-id
[ instance instance-id ]
Disabled by default.
Configuring IPv6 IS-IS between IPv6 MCE and PE
Step Command Remarks
1. Enter system view.
system-view N/A
2. Create an IS-IS process for an
IPv6 VPN instance and enter
IS-IS view.
isis [ process-id ] vpn-instance
vpn-instance-name
N/A