31
To do…
Use the command…
Remarks
Enter system view
system-view
––
Enter RIP view
rip
[
process-id
] [
vpn-instance
vpn-instance-name
]
––
Configure the filtering of incoming
routes
filter-policy
{
acl-number
|
gateway
ip-prefix-name
|
ip-prefix
ip-prefix-name
[
gateway
ip-prefix-name
] }
import
[
interface-type interface-number
]
Required
Not configured by default
Configure the filtering of outgoing
routes
filter-policy
{
acl-number
|
ip-prefix
ip-prefix-name
}
export
[
protocol
[
process-id
] |
interface-type interface-number
]
Required
Not configured by default
NOTE:
•
Using the
filter-policy import
command filters incoming routes. Routes not passing the filtering will be
neither installed into the routing table nor advertised to neighbors.
•
Using the
filter-policy export
command filters outgoing routes, including routes redistributed with the
import-route
command.
Configuring a priority for RIP
Multiple IGP protocols can run in a router. If you want RIP routes to have a higher priority than those
learned by other routing protocols, then assign RIP a smaller priority value to influence optimal route
selection.
Follow these steps to configure a priority for RIP:
To do…
Use the command…
Remarks
Enter system view
system-view
––
Enter RIP view
rip
[
process-id
] [
vpn-instance
vpn-instance-name
]
––
Configure a priority for RIP
preference
[
route-policy
route-policy-name
]
value
Optional
100 by default
Configuring RIP route redistribution
If a router runs RIP and other routing protocols, you can configure RIP to redistribute OSPF, IS-IS, BGP,
static, or direct routes.
Follow these steps to configure RIP route redistribution:
To do…
Use the command…
Remarks
Enter system view
system-view
––
Enter RIP view
rip
[
process-id
] [
vpn-instance
vpn-instance-name
]
––
