56
Management Ethernet port LED
(MGMT) status
Description
Steady yellow
A link is present on the port and the port is operating at 10/100
Mbps.
Flashing yellow
The port is sending or receiving data at 100 or 10 Mbps.
Off
No link is present.
1/10GBASE-T autosensing Ethernet port LED
Table 26 1/10GBASE-T autosensing Ethernet port LED description
1/10GBASE-T autosensing
Ethernet port LED status
Description
Steady green
A link is present on the port and the port is operating at 10 Gbps.
Flashing green
The port is sending or receiving data at 10 Gbps.
Steady yellow
A link is present on the port and the port is operating at 1 Gbps.
Flashing yellow
The port is sending or receiving data at 1 Gbps.
Flashing yellow (3 Hz)
The port has failed POST.
Off
•
No link is present on the port.
•
The port is operating in PoE mode (for PoE switches only.)
2.5G/1000/100BASE-T autosensing Ethernet port LED
The S5150-24S-PWR-EI switch provides a status LED for each 2.5G/1000/100BASE-T autosensing
Ethernet port. The status LED and the port mode LED work in conjunction to indicate the operating
status of the 2.5G/1000/100BASE-T autosensing Ethernet port.
Table 27 2.5G/1000/100BASE-T autosensing Ethernet port LED description
Port mode LED
(Mode) status
2.5G/1000/100BASE-T
autosensing Ethernet
port LED status
Description
Steady green (rate mode)
Steady green
A link is present on the port and the port is
operating at 2.5 Gbps.
Flashing green
The port is sending or receiving data at 2.5 Gbps.
Steady yellow
A link is present on the port and the port is
operating at 100/1000 Mbps.
Flashing yellow
The port is sending or receiving data at 100/1000
Mbps.
Flashing yellow (1 Hz)
The port has failed POST.
Off
No link is present on the port.
