20
[Sysname-Ten-GigabitEthernet1/1/3] undo shutdown
[Sysname-Ten-GigabitEthernet1/1/3] quit
•
Save the current configurations to the configuration file for the next startup to make IRF port
configurations effective after switch reboot.
[Sysname] save
The current configuration will be written to the device. Are you sure? [Y/N]:y
Please input the file name(*.cfg)[flash:/startup.cfg]
(To leave the existing filename unchanged, press the enter key):
flash:/startup.cfg exists, overwrite? [Y/N]:y
Validating file. Please wait....
Saved the current configuration to mainboard device successfully.
Configuration is saved to device successfully.
•
Activate configurations on the IRF port
[Sysname] irf-port-configuration active
mad arp enable
Syntax
mad arp enable
undo mad arp enable
View
VLAN interface view
Default level
3: Manage level
Parameters
None
Description
Use the
mad arp enable
command to enable ARP MAD for detecting multiple IRF virtual devices with the
same IP address on the network.
Use the
undo mad arp enable
command to disable ARP MAD.
By default, ARP MAD is disabled.
Examples
# Enable ARP MAD on VLAN-interface 3.
<Sysname> system-view
[Sysname] interface vlan-interface 3
[Sysname-Vlan-interface3] mad arp enable
mad enable
Syntax
mad enable
undo mad enable
