H3C S3100V3-EI Series, Руководство по установке, Страница: 8 / 57

1-1
1
Preparing for installation
This document is applicable to the S3100V3-EI switch series. Table1-1 describes the S3100V3-EI
switch series models.
Table1-1 S3100V3-EI switch series models
Switch model Product code (PID)
S3100V3-10TP-EI
LS-3100V3-10TP-EI
LS-3100V3-10TP-EI-GL
S3100V3-18TP-EI
LS-3100V3-18TP-EI
LS-3100V3-18TP-EI-GL
S3100V3-18TP-EI-DC LS-S3100V3-18TP-EI-DC
S3100V3-28TP-EI
LS-3100V3-28TP-EI
LS-3100V3-28TP-EI-GL
LS-3100V3-28TP-EI-H1
S3100V3-28TP-EI-DC LS-S3100V3-28TP-EI-DC
S3100V3-52TP-EI
LS-3100V3-52TP-EI
LS-3100V3-52TP-EI-GL
S3100V3-10TP-PWR-EI
LS-3100V3-10TP-PWR-EI
LS-3100V3-10TP-PWR-EI-GL
S3100V3-20TP-PWR-EI
LS-3100V3-20TP-PWR-EI
LS-3100V3-20TP-PWR-EI-GL
S3100V3-20TP-PWR-EI-DC LS-S3100V3-20TP-PWR-EI-DC
S3100V3-28TP-PWR-EI
LS-3100V3-28TP-PWR-EI
LS-3100V3-28TP-PWR-EI-GL
NOTE:
Switches of the same model but different PIDs might differ in hardware and software features. You
can view the PID of a switch on the label located on its rear panel or top panel.
Safety recommendations
To avoid equipment damage or bodily injury, read the following safety recommendations before
installation. Note that the recommendations do not cover every possible hazardous condition.
•
Before cleaning the switch, remove all power cords from the switch. Do not clean the switch
with wet cloth or liquid.
•
Do not place the switch near water or in a damp environment. Prevent water or moisture from
entering the switch chassis.
•
Do not place the switch on an unstable case or desk.
•
Ensure good ventilation at the installation site and keep the air inlet and outlet vents of the
switch free of obstruction.
•
Connect the yellow-green protection grounding cable before power-on.