Quick Start (For Soliton)
H3C S3100 Series Ethernet Switches
Chapter 3 Installation
3-11
II. Installation procedure
The wall-mounting procedure is as follows:
1) As shown in Figure 3-10, drill two holes 5 mm across in the
wall on the same horizontal line, with a distance of X=170
mm (6.69 in.).
Note:
Drill two holes according to the sizes of anchor kits and screws so that
anchor kits could go into the holes, only the edges could remain
outside the wall, and the screws could be fixed on the wall tightly.
2) Insert anchor kits into the holes and keep only the edges
outside the wall.
3) Drive screws into the anchor kits, keeping the inside of
screw head at least 1.5 mm (0.06 in) away from the edge of
the anchor kit so that the switch could hang on the screws
securely.