16
Step Command
Remarks
9.
Set the Overload bit of
LSPs and set the
lifetime for the set
Overload bit.
set-overload
[
timeout
]
By default, the Overload bit is not set.
Do not perform this task on the root RB of
a TRILL distribution tree. The root RB
cannot forward traffic when the Overload
bit of LSPs is set on the RB.
This command is available in Release
1135.
10.
Return to system view.
quit
N/A
11.
Enter Layer 2 Ethernet
or aggregate interface
view.
interface
interface-type
interface-number
N/A
12.
Configure the
minimum LSP interval
and the maximum
number of LSPs
transmitted per time.
trill
timer
lsp
interval
[
count
count
]
By default, the minimum LSP interval is 10
milliseconds, and the maximum number of
LSPs transmitted per time is 5.
Enabling TRILL LSP fast advertisement
IMPORTANT:
This feature is available in Release 1138P01 and later versions.
LSP fast advertisement enables TRILL to immediately advertise the specified number of LSPs that
invoke SPF calculation. This mechanism improves network convergence time.
To enable TRILL LSP fast advertisement:
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter TRILL view.
trill
N/A
3.
Enable TRILL LSP
fast advertisement.
flash-flood
[
flood-count
flooding-count
|
max-timer-interval
flooding-interval
] *
By default, TRILL LSP fast
advertisement is disabled.
Enabling TRILL pseudonode bypass
IMPORTANT:
This feature is available in Release 1138P01 and later versions.
This feature disables a DRB from generating LSPs for the pseudonode when the DRB has only one
neighbor on a broadcast network. This reduces the number of LSPs in the network.
To enable the pseudonode bypass feature:
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter Layer 2 Ethernet
interface view or Layer 2
aggregate interface view.
interface
interface-type
interface-number
N/A
