|<7> Skip Authentication for Console Login |
|<8> Storage Device Operation |
|<0> Reboot |
============================================================================
Ctrl+Z: Access EXTENDED ASSISTANT MENU
Ctrl+F: Format File System
Enter your choice(0-8):
# Enter
3
in the EXTEND-BOOTWARE menu to access the Ethernet submenu.
==========================<Enter Ethernet SubMenu>==========================
|Note:the operating device is cfa0 |
|<1> Download Image Program To SDRAM And Run |
|<2> Update Main Image File |
|<3> Update Backup Image File |
|<4> Download Files(*.*) |
|<5> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
|<Ensure The Parameter Be Modified Before Downloading!> |
============================================================================
Enter your choice(0-5):
# Enter
5
in the Ethernet submenu to configure the network settings.
Enter your choice(0-5):5
==========================<ETHERNET PARAMETER SET>==========================
|Note: '.' = Clear field. |
| '-' = Go to previous field. |
| Ctrl+D = Quit. |
============================================================================
Protocol (FTP or TFTP) :tftp
Load File Name :s12500.ipe
:
Target File Name :s12500.ipe
:
Server IP Address : 192.168.1.100 192.168.100.14
Local IP Address : 192.168.1.1 192.168.100.66
Subnet Mask :255.255.255.0
Gateway IP Address : 0.0.0.0
Table 1
Network parameter fields
Field Description
'.' = Clear field
Press the dot (.), and then press
Enter
to clear the setting for a
field.
'-' = Go to previous field
Press the hyphen (-), and then press
Enter
to return to the
previous field.
Ctrl+D = Quit
Press
Ctrl
+
D
to exit the Ethernet parameter settings menu.
Load File Name
Set the name of the file to be downloaded.
Target File Name
Set a file name for saving the file on the device. By default, the
target file name is the same as the source file name.