10
Step 4: Place the RPS unit horizontally on the
supporting tray, gently push the unit into the rack
along the supporting tray, and fix the mounting ears to
the front square-holed brackets of the rack with
screws and cage nuts, as shown in Figure 4 .
Figure 4
Install the RPS unit to a 19-inch rack (2)
3.2.2 Installing the RPS Unit on a Tabletop
If a 19-inch standard rack is not available, you
can place the RPS unit directly on a clean, stable
tabletop.
Follow these steps to install the RPS unit on a
tabletop:
Step 1: Cautiously turn the RPS unit upside down.
Then, use a piece of dry, soft cloth to remove any oil
stain or dust from the dents on the bottom of the
chassis.
