Manual Version: 6PW104-20170414
BOM: 3123A0R7
iii
Figure 3 Installing an NSQ1GT48EA0
(1) Gently push the LPU in along the slot guide rails until the LPU is in close contact with the backplane.
(2) Push the ejector levers inward.
(3) Tighten the captive screws with a Phillips screwdriver.
4.2
Removing the NSQ1GT48EA0
1.
Use a Phillips screwdriver to loosen the captive screws at both sides of the LPU until all pressure is
released.
2.
Pull the ejector levers at both sides of the LPU outward, and pull the LPU along the guide rails until
it completely comes out of the backplane.
3.
Place the LPU on an anti-static workbench with the surface-mounted components up, or put it in an
anti-static bag.
If no new LPU is to be installed, install a filler panel to prevent dust and ensure good ventilation in
the device.
5
Obtaining documentation
To access the most up-to-date H3C product documentation on the H3C websit1.
Go to
Choose the desired product category and model.
Copyright © 2017 New H3C Technologies Co., Ltd.
1
2
3
