4-7
Figure 4-7
SNMP v1 and SNMP v2 configuration page
z
Select the radio button before
Enable
to enable SNMP.
z
Select the radio button before
SNMPv1&v2
to specify the SNMP
version.
z
Configure
Read Password
and
Read & Write Password
, which
are used when the NMS performs read or read-write operations
on the device. Configure
Trap Password
, which is used for
authenticating the trap messages sent from the device to the
NMS.
z
You can specify the IP address of the NMS trusted by the agent
in the
Trusted Host
field as needed. Thus only the specified
NMS can access the device. Any NMS can access the device if
this field is not specified.
z
Specify the IP address of the host to which the SNMP trap
messages are sent in the
Trap Target Host
field.
z
Click
Apply
to finish the configuration.
