3-17
You can configure access control rules to define the time period, user
IP addresses, port range, and data packet types. The MSR 900
supports configuring up to five access control rules, in the order the
rules are configured.
Select
Security Setup
>
Access
from the navigation tree to enter the
page shown in Figure 3-23.
Figure 3-23
Access control configuration page
Table 3-1
Description of the configuration items
Item
Description
Begin-End
Time
Specifies the time period in which the rule is active,
with the end time ahead of the start time.
Week
Specifies the days in a week on which the rule is
active.
Protocol
Specifies the protocol used for transmitting packets.
This function allows access control by protocol,
which can be TCP, UDP and IP. “IP” refers to all
protocols.
Source IP
Address
Specifies the IP address range of hosts on the LAN
to be controlled.
To control the access of a single IP address,
192.168.1.2 for example, enter 192.168.1.2 ~
192.168.1.2.