214
Step Command
Remarks
3.
Specify an IPv6 subnet for
dynamic assignment.
network
prefix/prefix-length
[
preferred-lifetime
preferred-lifetime
valid-lifetime
valid-lifetime
]
By default, no IPv6 subnet is
specified.
4.
(Optional.) Specify a DNS
server address.
dns-server
ipv6-address
By default, no DNS server
address is specified.
5.
(Optional.) Specify a domain
name suffix.
domain-name
domain-name
By default, no domain name
suffix is specified.
6.
(Optional.) Specify a SIP
server address or domain
name.
sip-server
{
address
ipv6-address
|
domain-name
domain-name
}
By default, no SIP server
address or domain name is
specified.
7.
(Optional.) Configure a
self-defined DHCPv6 option.
option
code
hex
hex-string
By default, no self-defined
DHCPv6 option is configured.
Configuring the DHCPv6 server on an interface
Enable the DHCP server and configure one of the following address/prefix assignment methods on an
interface:
•
Apply an address pool on the interface
—The DHCPv6 server selects an IPv6 address/prefix from
the applied address pool for a requesting client. If there is no assignable IPv6 address/prefix in the
address pool, the DHCPv6 server cannot to assign an IPv6 address/prefix to a client.
•
Configure global address assignment on the interface
—The DHCPv6 server selects an IPv6
address/prefix in the global DHCPv6 address pool that matches the server interface address or the
DHCPv6 relay agent address for a requesting client.
If you configure both methods on an interface, the DHCPv6 server uses the specified address pool for
address assignment without performing global address assignment.
Configuration guidelines
•
An interface cannot serve as a DHCPv6 server and DHCPv6 relay agent at the same time.
•
Do not enable DHCPv6 server and DHCPv6 client on the same interface.
•
If you use the
ipv6 dhcp server
command multiple times, the most recent configuration takes effect.
•
You can apply an address pool that has not been created to an interface. The setting takes effect
after the address pool is created.
•
Only one address pool can be applied to an interface. If you use the
ipv6 dhcp server apply pool
command multiple times, the most recent configuration takes effect.
Configuration procedure
To configure the DHCPv6 server on an interface:
Step Command
Remarks
1.
Enter system view.
system-view
N/A
Содержание MSR 2600 Series
