H3C MSR 2600 Series, Руководство по настройке, Страница: 226 / 288

211
Configuration guidelines
•
An IPv6 prefix can be bound to only one DHCPv6 client. You cannot modify bindings that have
been created. To change the binding for a DHCPv6 client, you must delete the existing binding first.
• Only one prefix pool can be applied to an address pool. You cannot modify prefix pools that have
been applied. To change the prefix pool for an address pool, you must remove the prefix pool
application first.
• You can apply a prefix pool that has not been created to an address pool. The setting takes effect
after the prefix pool is created.
Configuration procedure
To configure IPv6 prefix assignment:
Step Command Remarks
1. Enter system view.
system-view N/A
2. (Optional.) Specify the
IPv6 prefixes excluded
from dynamic
assignment.
ipv6 dhcp server forbidden-prefix
start-prefix / prefix-len
[ end-prefix / prefix-len ]
By default, no IPv6 prefixes in the
prefix pool are excluded from
dynamic assignment.
If the excluded IPv6 prefix is in a
static binding, the prefix still can
be assigned to the client.
To exclude multiple IPv6 prefix
ranges, repeat this step.
3. Create a prefix pool.
ipv6 dhcp prefix-pool prefix-pool-number
prefix prefix / prefix-len assign-len
assign-len
This step is required for dynamic
prefix assignment.
By default, no prefix pool is
configured.
4. Create a DHCPv6
address pool and enter
its view.
ipv6 dhcp pool pool-name
By default, no DHCPv6 address
pool is configured.
5. Specify an IPv6 subnet
for dynamic assignment.
network prefix/prefix-length
[ preferred-lifetime preferred-lifetime
valid-lifetime valid-lifetime ]
By default, no IPv6 subnet is
specified for dynamic
assignment.
6. Configure static or
dynamic prefix
assignment.
•
Configure a static prefix binding:
static-bind prefix prefix / prefix-len
duid duid [ iaid iaid ]
[ preferred-lifetime preferred-lifetime
valid-lifetime valid-lifetime ]
•
Apply the prefix pool to the address
pool:
prefix-pool prefix-pool-number
[ preferred-lifetime preferred-lifetime
valid-lifetime valid-lifetime ]
Use at least one command.
By default, no static or dynamic
prefix assignment is configured
for an address pool.
To add multiple static IPv6 prefix
bindings, use the
static-bind
prefix command.