34
5.
Enter BGP-VPN IPv6 unicast address family view.
address-family ipv6
[
unicast
]
6.
Enable BGP to exchange IPv6 unicast routes with the specified peer.
peer
{
group-name
|
ipv6-address
[
prefix-length
]
}
enable
By default, BGP does not exchange IPv6 unicast routes with peers.
7.
Redistribute the VPN routes of the VPN site.
import-route
protocol
[
{
process-id
|
all-processes
}
[
allow-direct
|
med med-value
|
route-policy route-policy-name
]
*
]
By default, no routes are redistributed into BGP.
Display and maintenance commands for IPv6
MCE
Execute
display
commands in any view.
Task
Command
Display VPN instance information.
display ip vpn-instance
[
instance-name
vpn-instance-name
]
For commands that display routing tables for VPN instances, see
Layer 3—IP Routing Command
Reference
.
IPv6 MCE configuration examples
Example: Configuring IPv6 MCE
Network configuration
As shown in
, RIPng runs in VPN 2. The edge routers of VPN 1 and VPN 2 are VR1 and VR2,
respectively. Configure the MCE device to separate routes from different VPNs and advertise VPN
routes to PE 1 through OSPFv3.
Содержание MS4520V2-24TP
Страница 7: ...ii Example Configuring IPv6 MCE 34...
