33
import-route protocol
[
as-number
|
process-id
]
[
allow-ibgp
]
[
allow-direct
|
cost
cost-value
|
[
level-1
|
level-1-2
|
level-2
]
|
route-policy route-policy-name
|
tag tag
]
*
By default, IPv6 IS-IS does not redistribute routes from any other routing protocol.
If you do not specify the route level in the command, the command redistributes routes to the
level-2 routing table.
6.
Return to system view.
quit
7.
Enter interface view.
interface interface-type interface-number
8.
Enable the IPv6 IS-IS process on the interface.
isis ipv6 enable
[
process-id
]
By default, no IPv6 IS-IS process is enabled on the interface.
Configuring EBGP between an MCE and a PE
1.
Enter system view.
system-view
2.
Enter BGP instance view.
bgp
as-number
[
instance
instance-name
]
3.
Enter BGP-VPN instance view.
ip vpn-instance
vpn-instance-name
4.
Configure the PE as an EBGP peer.
peer
{
group-name
|
ipv6-address
[
prefix-length
]
}
as-number
as-number
5.
Enter BGP-VPN IPv6 unicast address family view.
address-family ipv6
[
unicast
]
6.
Enable BGP to exchange IPv6 unicast routes with the specified peer.
peer
{
group-name
|
ipv6-address
[
prefix-length
]
}
enable
By default, BGP does not exchange IPv6 unicast routes with peers.
7.
Redistribute VPN routes.
import-route
protocol
[
{
process-id
|
all-processes
}
[
allow-direct
|
med med-value
|
route-policy route-policy-name
]
*
]
By default, no routes are redistributed into BGP.
Configuring IBGP between an MCE and a PE
1.
Enter system view.
system-view
2.
Enter BGP instance view.
bgp
as-number
[
instance
instance-name
]
By default, BGP is not enabled.
3.
Enter BGP-VPN instance view.
ip vpn-instance
vpn-instance-name
4.
Configure the PE as an IBGP peer.
peer
{
group-name
|
ipv6-address
[
prefix-length
]
}
as-number
as-number
Содержание MS4520V2-24TP
Страница 7: ...ii Example Configuring IPv6 MCE 34...
