Installing transceiver modules and cables
光模块或线缆的安装与拆卸
For the installation and removal procedure for transceiver modules and cables, see
H3C
Transceiver Modules and Network Cables Installation Guide
at www.h3c.com.
光模块和线缆的安装与拆卸，请您参见
H3C
网站发布的《
H3C
光模块及线缆 安装指导》
中的相关内容。
4
1
2
3
Place the removed card on an anti-static mat or in an anti-static bag.
请将拆卸下来的
接口模块扩展卡及时放置到防静电垫子上或防静电袋中。
!
①
Press the latch on the card to release the ejector
lever.
按压接口模块扩展卡上的锁闩使扳手弹出。
②
Hold the ejector lever to pull the card outward until the
card is disconnected from the connectors.
拉动扳手使
接口模块扩展卡与设备内连接器端子脱离。
③
Hold the card with both hands and take it out slowly.
用
双手水平缓慢地取出接口模块扩展卡。
Verifying the installation
After the installation is complete, determine whether the card is operating correctly.
If the card fails to operate correctly, perform the following steps:
Reinstall the card following the installation procedures described in this document.
If the issue persists, contact H3C Support.
全部安装完成后，在交换机运行正常的情况下，若发现接口模块扩展卡无法正常工作：
您可以按照手册中介绍的方法重新安装接口模块扩展卡。
如果重新安装后，接口模块扩展卡仍无法正常工作，请您联系
H3C
技术支持人员。
