4-4
5) Set HyperTerminal properties. In the HyperTerminal window, choose
File
>
Properties
from the
menu, and select the
Settings
tab to enter the properties setting dialog box, as shown below.
Select
VT100
or
Auto detect
from the
Emulation
drop-down list, and click
OK
to return to the
HyperTerminal window.
Figure 4-6
Set the emulation type
Starting Up the LSQM1WCMB0
Checks Before Power-On
Before starting up the access controller module, verify that:
z
The power cables and ground cable are correctly connected.
z
The power outlet voltage meets the voltage requirement of the switch.
z
The console cable is correctly connected, the console terminal or PC is running, and the terminal
parameters are properly set.
Powering On the Access Controller Module
Upon power-on of the LSQM1WCMB0, the console terminal displays the following information:
*******************************************
* *
* H3C WCMB BootWare , Ver 1.08 *
* *
*******************************************
Copyright(c) 2004-2007 Hangzhou H3C Tech. Co., Ltd.
